Furnace Humidifier Water Valve

[post_title]

Description:

Turn on the water. Turn on the furnace power supply. • Ensure the water supply valve is open and supplying water Your furnace humidifier will automatically cycle ON & OFF when your furnace cycles, no adjustments are required.

HE360A,B POWERED FLOW-THROUGH HUMIDIFIER 3 69-1176—04 WELCOME To the comfortable world of humidified air. When you use your Honeywell humidifier,

HE360 HUMIDIFIER AND INSTALLATION KIT 69-2631ES—01 2 WELCOME The warm dry air, from the furnace, passes over the humidifier pad and valve. No water to drain. Electrical Verify control circuit wiring. Check all connections.

14. Reinstall the solenoid valve onto the humidifier side, feed the flexible black water supply tube back through the humidifier side, reinstall the humidifier side (if removed) onto the

HE360A,B POWERED FLOW-THROUGH HUMIDIFIER 68-0194—2 6 IMPORTANT • The saddle valve is not designed to regulate water flow; the valve is either open or closed.

HE220, HE260 HUMIDIFIER INSTALLATION KIT 69-1570 2 Determining Best Location for Humidifier • Select a location for the humidifier on the supply

Water Saver Humidifier • 100% Efficient in water usage • Saving up to 30-50 gallons/day • Large bypass style • Part #: HUMCCWBP2417-A24 Product Overview

furnace blower. When the Aprilaire Humidifier Control calls for humidity and the blower is operating, water flows to the distribution tray located at Do not use the saddle valve to regulate the water flow. It is designed to be completely opened or closed.

The Enviracaire Elite™ HE225A,B Bypass Flow-Through Humidifier uses the warm air furnace blower to provide humidification for the whole house. The HE225A,B works with virtually any • The saddle valve is not designed to be used to regulate water flow. The valve is either open or closed.

Even when your furnace is not running. A furnace humidifier will work to offset the constant affect the dry outside air has on your home, and your home’s furnishings. Turn on the water supply at the saddle valve and check for any leaks. 5.

HE225A,B AND HE265A,B BYPASS FLOW-THROUGH HUMIDIFIERS 5 68-0244-1 PLUMBING THE SADDLE VALVE Hot or cold water, either hard or softened, can be used in the

That the water saddle valve is open and that there is electricity to the humidifier. The furnace blower motor must be operating and the furnace calling for heat for the Aprilaire Humidifier to function. Note: Turning the

11 Humidifier Start-up. Open the saddle valve, put the furnace power back on and start the furnace in a heating cycle. Set the humidistat at the maximum setting.

VALVE WIRES FURNACE BLOWER MOTOR COMMON 24 VAC FURNACE ACCESSORY TERMINALS (10 VA MINIMUM) OR 24 VAC TRANSFORMER (10 VA MINIMUM) Do not install humidifier where water pressure exceeds 125 psi, since damage to the humidifier may result. Follow codes in effect

• Do not install the humidifier on the furnace jacket, • Install the water supply valve on household water supply pressure only. • Follow furnace manufacturer recommendations for electrical connections if provided.

12 Humidifier Start-up. Open the saddle valve, put the furnace power back on and start the furnace in a heating cycle. Set the humidistat at the maximum setting.

HE360A,B POWERED FLOW-THROUGH HUMIDIFIER 68-0194—2 6 IMPORTANT • The saddle valve is not designed to regulate water flow; the valve is either open or closed.

DS 2001 REVISED Humidifier Assembly and Instruction Manual Warning • Disconnect electrical power to the furnace before starting electrical installation.

The Enviracaire Elite™ HE365A,B Powered Flow-Through Humidifier works with the warm air furnace blower to provide humidification for the whole house. • The saddle valve is not designed to regulate water flow; the valve is either open or closed.

Yellow 24 v solenoid valve wires 24 vac furnace accessory terminals (10 va minimum) or 24 vac transformer (10 va minimum) shut-off (saddle valve) water supply