[post_title]
Description:
2-STAGE HIGH INTENSITY GAS INFRARED HEATERS INSTALLATION INSTRUCTIONS APPLIES TO: o Installation o Operation o Maintenance! Canada: In a repair garage, the minimum clearance from the bottom of an infrared heater to the upper surface of the highest vehicle which may be housed therein shall be 50
Product Description of [post_title] below:
Domestic Shipping: This item is also available for shipping to select countries outside the U.S.
International Shipping: This item is not eligible for international shipping.
Average Customer Review: 9/10
MOUNTING CLEARANCES – GAS INFRARED HEATER Each heater must be installed such that the following “Minimum Clearance to Combustibles’ are maintained.
This heater is a self-contained infrared radiant tube heater for use in locations where flammablegasesorvapors certified minimum clearance, Groups of heaters with a common vent must be controlled by a common thermostat.
2.0 Safety 5 Design Guide SAFETY 2.0 Safety • Applications • Clearance to Combustibles Applications Infrared heaters are not explosion proof. No tube heater may be used in a Class 1 or Class 2 Explosive
Clearance to Combustibles Infrared heaters are designed and certified for use in industrial and commercial buildings such as warehouses, manufacturing plants, aircraft hangars and vehicle maintenance shops. For maximum safety,
Low Intensity Infrared Heaters Series TLP 9-117.3 TabLe of conTenTS Modine's TLP Series sets the industry standard for low intensity infrared heating performance and installation CHAIN LOCATION Clearance to each end and above the U-Tube is 12 inches.
Superior technology superior performance superiorradiant.com long, low & even heat infrared heaters series la/lx/lxr low clearance, even heat
Vent-Free Gas Wall Heater Infrared WARNING:This appliance is equipped for (Natural and Propane) gas. Sellers of unvented propane or natural gas-fired supplemental room heaters shall provide to each purchaser a copy of 527 CMR 30 upon sale of the unit.
STERLING “RSG” SERIES INFRARED RADIANT TUBE HEATER RSGS-1 PROJECT: UNIT TAG: ** The clearance is 42" with defl ector / 30" side clearance with defl ector. based on the number of heaters per duct. STERLING “RSG” SERIES
Infrared Heaters Installation/Operation Form RGM 450 (Version Installation should be done by a Reznor distributor or other In Canada, in a garage, the minimum clearance from the bottom of an infrared heater to the upper surface of the highest vehicle which may be housed therein shall be
INFRARED RADIANT HEATER. SUBMITTAL ♦ DK 1 Jul-13 1) clearance, but the clearance shall not be less than 8 feet. Where unvented infrared heaters are used, natural or mechanicalmeansshallbeprovidedtosupplyandexhaust